USB 3.2 Gen1 TO Gigabit ETH User Guide

Product Overview

This product is a USB 3.2 Gen1 to Gigabit Ethernet port wired Internet converter, equipped with Realtek RTL8153 original high-performance main control chip, multi-system compatibility, driver-free, plug and play, support Win7/8/8.1/10 , Mac, Linux, Android and other systems.

Support wired gigabit network, fast network speed, low latency, stable performance, play games, watch high-definition movies without lag, easily solve problems such as no network port or network card damage.

Product parameters

Main control chip: RTL8153
Network port type: RJ45 Gigabit Ethernet port
USB interface: USB 3.2 Gen1 (If connected to the USB 2.0 interface, the network speed cannot reach Gigabit)
Network standard: 10/100/1000Mbps
Support system: Win7/8/8.1/10, Mac, Linux, Android
Line length: about 15cm (measured manually and there may be errors)
Status light: green light is always on, yellow light is flashing

Size

Document

Driver

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Raspberry Pi display Electronic EYE 0.71 inch Round LCD Display Screen For Arduino Raspberry Pi ESP32 Pico STM32 ESP32-S3 Display Raspberry Pi IR Ther SpotPear Raspberry Pi 5 / 4B UPS With PD Trigger Activation Uninterruptible Power Bank Supply 9600mAh 5V/5A 25W Also For Phone/Mini Computer PC Arduino Thermal imaging SpotPear Raspberry Pi 5 Camera Raspberry Pi 5 Audio hat Raspberry Pi 5 Case SpotPear Modbus RTU Relay 32CH ESP32 C3 Round LCD Development Board Electronic EYE 0.71 inch Display Watch Screen GC9A01 160x160 Solar Charge Module ESP32-S3 Arduino Thermal imaging camera 2.13Inch E-Ink Luckfox Pico RP2040-PiZero