• sales

    +86-0755-88291180

RGB-5050-5V-IP65-60D-1M User Guide

   Specifications

  • LED light source: 5050 light beads
  • IC model: WS2812B
  • Voltage: 5V
  • Color: RGB
  • Circuit board: PCB width 10mm
  • Beam angle: 120°
  • Working power: 0.3W / piece
  • Length of each roll: 1 m / roll
  • Working temperature: -25~80℃
  • Gray level: 256 adjustable gray levels (per color)
  • Specifications: 60 lights/m
  • Protection class: IP65
  • Outlet mode: 3PIN terminal head power cord + 2PIN supplementary voltage power cord
  • Installation method: 3M glue on the back of the light strip
  • Terminal wires: red wire (5V positive), white wire (5V negative), green wire (DATA signal wire)



Product details




Note: When cutting, it should be cut from the cutting point to avoid or reduce unnecessary waste and damage


Strong flexibility, can be bent at will

High light transmittance flexible insulating material, anti-leakage, can be bent into any shape


IP65 degree of protection

The lamp beads are covered with high transparent resin, which can prevent a small amount of water splash


Installation method



Physical demonstration



Product display



Outline Dimensions




TAG: Raspberry Pi AF Camera X1012 Raspberry Pi 5 POE And PCIe to M.2 NVMe SSD Board Pi5 2280 Power over Ethernet Raspberry Pi 5 RTC charge configuration Raspberry Pi RTC WatchDog Raspberry Pi MLX90641 Sipeed FPGA Tang Primer 20K Dock/Lite 128M DDR3 Development Board GW2A-LV18PG256C8/I7 Raspberry Pi Compute Module 5 CM5 Cortex A76 BCM2712 With/Without Wi-Fi RAM 2/4/8/16GB eMMC Lite/8/16/32/64GB E-Paper Font Tutorial Raspberry Pi 5 Audio Card Computer USB Monitor Screen Arduino 1.5inch LCD MiniPCIe Interface 2 CH CAN Card USB CAN Multiple Protection Circuits For Linux/Windows Raspberry Pi 0.96inch OLED Raspberry Pi 5 PC USB Monitor Screen Gripper Serial Robotic Arm Gripper Mechanical claw Serial Bus Servo ST3215/CF35-12 luckfox-pico-ultra-w-WIFI-Bluetooth Raspberry Pi Pico 2 RP2350-Tiny/Tiny-Kit Super Mini Board RP2350A Sipeed-Lichee-Tang-Nano-FPGA-Series-IDE-Install Raspberry Pi