• sales

    +86-0755-88291180

Raspberry Pi CM4 to CM3 Adapter User Guide

Overview

Since the Raspberry Pi Compute Module 3 (CM3) module is in short supply, the CM4 to CM3 adapter is designed to convert CM4 module to CM3 interface.

This adapter board converts the latest Raspberry Pi Compute Module 4 (CM4) to CM3 interface, allowing CM4 to adapt to the old CM3+/CM3/CM3L series baseboard. Also Support to use CM4 with Geekworm 12mm aluminum alloy heatsink C235.

When install the CM4 module into CM4 to CM3 adapter board, please pay attention to the CM4 install directions.

Note:

  1. Make sure that the CM4 module is installed on the expansion board correctly before power on.
  2. Please pay attention to the CM4 install directions.
  3. The Raspberry Pi Compute Module 4 or heatsink is not included in the packing list.


TAG: Raspberry Pi Pico 2 RP2350 1.28 inch Round LCD TouchScreen Development Board 240x240 Display QMI8658 6-Axis $17.9 Raspberry Pi RTC Raspberry Pi Pico Raspberry Pi RP2040 Long-Rang Luckfox Pico Arduino Board Managers Tutorial User Guide Raspberry Pi OpenWrt Tutorial 2 spotpear ESP32 S3 Development Board 2.8 inch B LCD 2.8inch Display 480x640 TouchScreen QMI8658 Sensor / Battery Port LVGL/HMI For Arduino RDK X5 PoE Module For Power Over Ethernet/ IEEE 802.3af/at PoE For D-Robotics RDK X5 Raspberry Pi CM5 IO BASE B Mini Board a Base Development Platform Compute Module 5 IO Board with EEPROM And Encryption chip Raspberry Pi 5 PCIe TO Gigabit RJ45 ETH Adapter Board (C) Driver-Free RTL8111H For Pi5 STM32 1.54inch OLED JETSON-IO-BASE-A Raspberry Pi 5 User Guide ESP32 C3 LCD Raspberry Pi 5 PD Activation Module ESP32 2 inch Capacitive TouchScreen LCD Display ST7789 CST816D 240x320 For Arduino/Raspberry Pi/Pico Raspberry-Pi-A7670E-GSM-GPRS-GNSS-LTE-Cat-1-2G-A-User-Guide Cortex-A53