Raspberry Pi Compute Module 3 User Guide

Overview

The Compute Module 3 contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM) as well as a 4GB eMMC Flash device (which is the equivalent of the SD card in the Pi). The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad-core CPU.

This is all integrated on to a small 67.6mm x 31mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi).

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Tang Nano Series FPGA FAQ ESP32 S3 R8 MP3 Board 2.8inch LCD TouchScreen Display Speaker/SD-Card/Battery/QMI8658-6-Axis-Sensor 0.96inch1.3inch1.44inch1.8inch LCD Display Screen Round Arduino Raspberry Pi ESP32 Pico STM32 Argon MEGA2560 R3 X1015 Raspberry Pi 5 PCIe to M.2 Key-M NVMe SSD Board Pi5 2280 Core3566102032 Raspberry Pi 3 LCD HAT Milk V Duo IO Board Tutorial ESP32-P4-NANO Development Board RISC-V WiFi6 MIPI CSI Camera / 10.1 inch DSI Display / USB / RJ45 Ethernet / POE / Audio Buzzer Raspberry Pi RTC JETSON-NANO-MINI Argon ONE V3 Case with FAN IR For Raspberry Pi 5 E-Paper Font Tutorial Industrial Modbus RTU RS485 4-ch Relay With isolation protection and guide rail Jetson Nano Development Board Font-Modulation-Tutorial User Guide ESP32 Development Board C3 1.28 inch Round Rotary LCD Smart Screen 1.28inch Knob Display 240x240 LVGL for Arduino LuckFox Pico Camera Pi5 Case