Raspberry Pi Compute Module 3+ series User Guide

Overview

Raspberry Pi Compute Module 3+ 8GB/16G/32G. This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： spotpear Milk V Duo IO Board Tutorial LuckFox Pico CSI-to-HDMI Raspberry Pi 4 Camera Raspberry Pi DSI display EVAL-ADXL354CZ ESP32 C3 1.44inch LCD CAN FD Raspberry Pi 5 Raspberry Pi OpenWrt Tutorial 2 RS485 to RJ45 ESP32-S3R2 Arduino Thermal imaging Raspberry Pi Pico Buzzer Raspberry Pi Pico 2 RP2350-Tiny/Tiny-Kit Super Mini Board RP2350A SpotPear ESP32 S3 R8 MP3 Board 2.8inch LCD TouchScreen Display Speaker/SD-Card/Battery/QMI8658-6-Axis-Sensor Servo 0.99inch

Raspberry Pi Compute Module 3+ series User Guide

Overview

To：

Email(support)

Raspberry Pi Compute Module 3+ 32GB