1.3inch OLED (B) User Guide

Introduction

1.3inch OLED, SPI/I2C interfaces, straight/vertical pinheader

Resources

Question:

What is the electricity voltage of the system working with an OLED module?

Answer:

The OLED module should work at a system with 3.3V operation voltage. However, it can work properly at a system with 5V operation voltage as well, the aging test (more than 24 hours) shows.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： SpotPear Raspberry Pi 5 Official Original AI Kit Hailo8l 13Tops/26Tops PCIe M.2 HAT+ Board For Pi5 Raspberry Pi 5 DSI User Guide USB to JTAG LuckFox Pico plus Raspberry-Pi-1.54inch-LCD-Display-Touchscreen-configuration-Bookworm-Lite For Pi5 SpotPear Milk-V Duo Wiki Raspberry Pi CM4 Raspberry Pi Camera Industrial Modbus POE ETH RJ45 To Relay 30CH RTU/Modbus TCP-Ethernet For IOT SpotPear Pi5 PCIe Raspberry Pi LCD Raspberry Pi Pico SpotPear ESP32 S3 R8 MP3 Board 2.8inch LCD TouchScreen Display Speaker/SD-Card/Battery/QMI8658-6-Axis-Sensor Raspberry Pi IR Array Thermal Imaging Camera Far infrared 80×62 Pixels 45/90 Degree FOV Raspberry Pi Display Driver Board RV1106

1.3inch OLED, SPI/I2C Interfaces, Straight/Vertical Pinheader

TAG： Banana Pi BPI-M4 Berry Spotpear XD-51 RP2040 0.85inch LCD Raspberry Pi 4 Model B ESP32-S3 1.28inch Round LCD Raspberry Pi 5 PoE HAT Raspberry Pi 5 Model - 2GB / 4GB / 8GB RAM Raspberry Pi 5 CSI Cable Finger Vein Scanner Fingerprint Recognition Metal Flat Key Shaft Flange Plate A Serial Bus Servo NVIDIA Gyroscope Sensor Raspberry Pi Long Bar Screen Raspberry Pi 5 JETSON-NANO-MINI-Board Raspberry Pi 5 8mp Camera M12 High Resolution Lens 16MP 105 3.56mm Raspberry Pi High Quality HQ Camera M12 PC Secondary Screen Industrial Gigabit PoE Splitter Options Type-C DC Micro Raspberry Pi WebCamera WirelessAP