UART 2.2 inch LCD with PL2303


UART LCD
2.2inch LCD-PL2303

Part Number

UART 2.2 inch LCD with PL2303

Manufacturer SpotPear
Price Break@ 1Unit@ 2Units@ 10Units
Unit Price($)

5.9

5.9 5.9
Overview

2.2 Inch UART TFT LCD Display TFT Module with FLASH Colorful Screen Serial Port for Arduino Raspberry Pi STM32 with PL2303 USB to UART/TTL


Function
  • 2.2 inch LCD
  • Without touch
  • Viewing angle : 12
  • LCD Module SIZE : 54.8 x 41.3 mm
  • Display SIZE : 43.56 x 36.2
  • Viewing angle : 176 x 220
  • Driver IC : Do not need driver but your MCU need have a UART Port(Serial Port)
  • Color : 62k/262k
  • Driver Port : UART

How to use

Detailed Information see this weblink :
http://www.spotpear.com/download/LCD/uart/UART-LCD22/Document/UART-Command-Introduction-EN.docx

Introduction

CMD

Reset

RESET

Get the version information instructions for the module

VER

Set the baud rate command

BPS(bps)

Clear command

CLR(c)

LCD control CMD

LCDON(on_off)

Display the LCD

FSIMG(addr,x,y,w,h,mode)

Image download to FLASH command

FS_DLOAD(SIZE)

Vertical and horizontal screen switch CMD

DIR(H_V)

Set the brightness of the backlight

BL(p)

Draw points

PS(x,y,c)

Draw lines

PL(x1,y1,x2,y2,c)

Draw box

BOX(x1,y1,x2,y2,c)

Draw box with Filled color

BOXF(x1,y1,x2,y2,c)

Draw a circle

CIR(x,y,r,c)

Draw a circle with Filled color

CIRF(x,y,r,c)

Set background color

SBC(c)

Display 16 high character With background color instruction

DCV16(x,y,*str,c)

Display 24 high character With background color instruction

DCV24(x,y,*str,c)

Display 32 high character With background color instruction

DCV32(x,y,*str,c)

Package Contains
  • 2.2 inch UART lcd x 1
  • DuPont line 4P x 1
  • Long yellow Pin 4P x 1
  • PL2303hx USB TO UART module × 1
  • 5P DuPont line ×1