Raspberry Pi 2.4inch LCD


【Raspberry pi 】
2.4inch LCD】

Part Number  Raspberry Pi 2.4.inch LCD    
Manufacturer SpotPear 
Price Break@ 1Unit@ 20Units@ 100Units
Unit Price($) 8 7.5 7
Overview The Raspberry Pi 2.4inch touchscreen is an LCD module designed for Raspberry Pi A+. It also can work at the Raspberry Pi 1/2 B/B+ and the Raspberry Pi 3 module B


Features

  • Designed for Raspberry Pi A+,Compatible with Raspberry Pi 3 module B/B+//B
  • SPI High speed 48Mhz
  • Support touch and camera
  • 320*240  (Pixel)


Photos

 


Key Parameters

LCD Type TFT
LCD Interface SPI
Touch Screen Type Resistive
Touch Screen Controller XPT2046
Colors 65536
Backlight LED
Resolution 320*240 (Pixel)
Aspect Ratio 4:3
SPI Diver Speed 48Mhz
Backlight Current TBD
Operating Temp. (℃) TBD

Interface

PIN NO.SYMBOLDESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 22 NC NC
6, 9, 14, 20, 25 GND Ground
11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
12 KEY1 Key
13 RST Reset
15 LCD_RS LCD instruction control, Instruction/Data Register selection
16 KEY2 Key
18 KEY3 Key
19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel
21 TP_SO SPI data output of Touch Panel
23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel
24 LCD_CS LCD chip selection, low active
26 TP_CS Touch Panel chip selection, low active

Package Contains
  • Raspberry Pi 2.4inch LCD x 1
  • Touch pen x 1
  • RPi screws pack (2pcs) x 1
    1. 2. 3.