【Delta 3D Printer】
【the Heated Bed】
The Delta 3D Printer Reprap Self-assembly DIY full kit With the Heated Bed is a open source 3D Printer with proving the stl file of the 3D Printer.With the stl file of the 3D Printer, you can copy another 3D Printer by youself.
With the Self-assembly DIY full kit ,you can install a full 3D Printer and print by PLA or ABS(With the Heated Bed, you can print by ABS.The ABS is unhealthful for human body but the print quality is better than PLA).It is the good choice for Maker and DIY funs
The Delta 3D Printer is Reprap type，The driver board source program and the 3D Printer stl file is Open Source.
The 3D Printer is helpful for the people to study 3D Printer
Self-repair and replication：
With the stl file of the 3D Printer, you can copy another 3D Printer by youself.
The Delta 3D Printer with Self-leveling is easy to use for the new user
Wiht the Heated Bed：
When you print a big item. The printed item will be easy to be alice edge. With the Heated Bed, the alice edge phenomenon will be mitigated. With the Heated Bed,you can also print the ABS
1.The 3D Printer Size： Wide 30CM ; High 65CM
2.The 3D Printer Weight：8.5KG,
4.Print Size；Diameter 180MM ; High 310MM,
6.Print Material：1.75MM PLA
10.Printing Methods：USB Print or SD card
12.With the Heated Bed
Packaging real shot
40 hours uninterrupted printing large volume of the object
After stripping support
- The Delta 3D Printer Self-assembly DIY full kit With the Heated Bed x 1