Raspberry Pi RGB HAT Kit


【Pi RGB HAT Kit】
 

Part Number Raspberry Pi RGB HAT Kit
Manufacturer SpotPear
Price Break@ 1Unit@ 20Units@ 100Units
Unit Price($) 7.99 7.99 7.99
Overview

Raspberry Pi RGB LCD dirver board Kit(DPI drive),Support 5 inch (40PIN LCD),7 inch(50PIN LCD) ,10.1 inch(50PIN LCD)



Features
  • Support Raspberry Pi
  • Support Raspbian OS
  • Driver Board:
    1.Support 5 inch (40PIN LCD),7 inch(50PIN LCD) ,10.1 inch(50PIN LCD)

(This kit just include driver board , if want LCD,Please buy alone, Do not include Raspberry Pi)


Recommend

7 inch1024x600 IPS kit(Click to buy)


What RGB LCD this driver board support?
(If your LCD is not bought from us, we will not be sure that the driver board will work with yourself LCD.So if yourself LCD do not work with our dirver board we will not provide technical support and can not give back the money to you)
50Pin RGB LCD (7inch/10.1inch LCD)40Pin RGB LCD(5inch LCD)
1 LED A - (LED Anode)  1 LED K - (LED Cathode)  
2 LED A - (LED Anode)  2 LED A - (LED Anode) 
3 LED K - (LED Cathode)   3 GND - (Digital Ground)  
4 LED K - (LED Cathode)   4 DVDD - (Digital Power)
5 GND - (Digital Ground)   5-28 R0~R7/G0~G7/B0~B7 - (Red/Green/Blue) 
6 VCOM - (VCOM DC input)   29 GND - (Digital Ground)  
7 DVDD - (Digital Power) 30 DCLK - (Clock input)
8 MODE - (DE/SYNC select) 31 DISP - (DISPLAY ON/OFF)
9 DE - (Data enable signal) 32 HSYNC - (Horizontal sync input) 
10 VSYNC - (Vertical sync input)  33 VSYNC - (Vertical sync input) 
11 HSYNC - (Horizontal sync input)  34 DE - (Data enable signal)
12~35 B7~B0/G7~G0/R7~R0 - (Blue/Green/Red) 35 NC - (Not connect) 
36 GND - (Digital Ground) 36 GND - (Digital Ground)  
37 DCLK - (Clock input) 37 NC - (Not connect) 
38 GND - (Digital Ground) 38 NC - (Not connect) 
39 L/R - (Source right or left)  39 NC - (Not connect) 
40 U/D - (Gate up or down)    40 NC - (Not connect) 
41 VGH - (Positive Power)       
42 VGL - (Negative Power for TFT)     
43 AVDD - (Analog Power)     
44 RSTB - (Global reset pin)     
45 NC - (Not connect)     
46 VCOM - (For external VCOM DC input)     
47 DITHB - (Dithering setting)     
48 GND - (Digital Ground)     
49~50 NC - (Not connect     
 

Picture


Tutorial

1. Insert the SD card to your computer.open the file "config.txt" at the SD card root directory by your computer

2.Add the following code at the end of the file,Then save the changed file

  • If 800x480 Resolution LCD(such us 5 inch,7 inch):
    dtoverlay=dpi24
    enable_dpi_lcd=1
    display_default_lcd=1
    dpi_group=2
    dpi_mode=87
    dpi_output_format=0x6f005
    hdmi_timings=800 0 40 48 88 480 0 13 3 32 0 0 0 60 0 32000000 6
  • If 1024x600 Resolution LCD(such us 7 inch,10.1 inch):
    dtoverlay=dpi24
    enable_dpi_lcd=1
    display_default_lcd=1
    dpi_group=2
    dpi_mode=87
    dpi_output_format=0x6f005
    hdmi_cvt 1024 600 60 6 0 0 0

3.Insert the SD card to your Pi. Then work

Please do not unplug or plug the RGB LCD when powered

Package Contains
  • RPi RGB HAT Board x 1
  • FFC Line x 1
  • 50Pin to 40Pin Adapter board x 1