【3D Printer Accessories 】
1. You can choose :
- Filament: 1.75mm/3.0mm
- The nozzle size: 0.2/0.3/0.4/0.5mm
- Heat tube:12V/24V 40W,length 1 meter
- Thermistor:100K NTC B 3950 ±1% ,length 1 meter(There is only one option "100K NTC B 3950 ±1%")
The most people's choice : Filament: 1.75mm/The nozzle size:0.4mm/Heat tube:12V
We strongly recommend the beginner to choose "Filament: 1.75mm/The nozzle size:0.4mm/Heat tube:12V"
The very few people use the Filament: 3.0mm, You will be very hard to get Filament: 3.0mm
The Printing accuracy can be 0.1-0.3mm by using "the nozzle size:0.4mm ".
The larger nozzle size "0.5 mm"will make the printing accuracy bad when your 3D Printer's accuracy is set at 0.1mm.
The smaller nozzle size "0.2/0.3 mm"will make the printing speed slow because the print thickness cann't be more than 0.2mm
2. If no any orders Remarks, We will send "Filament: 1.75mm/The nozzle size:0.4mm/Heat tube:12V"
J-Head Hot End Kit E3D-V5+FAN+PTFT tube+PC4-01 -1.75mm/3.0mm Bowden/RepRap 3d printer extruder parts accessories E3D V5 print head Nozzle: 0.2/0.3/0.4/0.5mm
- 3D Printer Accessories(J-Head Hot End Kit E3D-V5+FAN+PTFT tube+PC4-01) x 1